JST Posted March 26, 2007 Share Posted March 26, 2007 Well i reckon it looks bloody good and would be good to see it in action, heres looking fwd to HBRO then, and maybe X-Eng Challenge 16 Jun? show those MT boys how its really done! Quote Link to comment Share on other sites More sharing options...
WHO? Posted March 27, 2007 Share Posted March 27, 2007 yeah all euro 80 series had factory e-lockers and are high pinion and also have big cv's only to be rivalled by gq and gu/gr nissan axles (which swap under rovers very nicely too ) search outerlimits for more info oh and 80 series arnt that pricey either 300 for a set for my landcruiser 2 anyway back to browsing now that ive made my first post since joining quite some time ago!!!! Quote Link to comment Share on other sites More sharing options...
pugwash Posted March 27, 2007 Share Posted March 27, 2007 and a very nice first post it was too Quote Link to comment Share on other sites More sharing options...
nas90 Posted March 29, 2007 Share Posted March 29, 2007 hmmm beadlocks nice one nick. what variety are these then-weld on? do you know where they came from, and were there any problems with installation from poor manufacturing? gives us a good oppotunity to have another debate about whether or not they are road legal with installation from poor manufacturing? Cut using the best machine money can buy http://www.uk.trumpf.com/ Quote Link to comment Share on other sites More sharing options...
roguevogue Posted March 29, 2007 Author Share Posted March 29, 2007 with installation from poor manufacturing? Cut using the best machine money can buy http://www.uk.trumpf.com/ Calm down dear!! People have had trouble with items of a lesser quality, yours are top notch. Quote Link to comment Share on other sites More sharing options...
landrover598 Posted March 29, 2007 Share Posted March 29, 2007 Cut using the best machine money can buy http://www.uk.trumpf.com/ What are your lazers like at cutting thicker than 20mm ? I've got to find where i work a company who can cut 20+ The people we use now can't do more the 15 accurately Quote Link to comment Share on other sites More sharing options...
roguevogue Posted March 29, 2007 Author Share Posted March 29, 2007 What are your lazers like at cutting thicker than 20mm ? I've got to find where i work a company who can cut 20+The people we use now can't do more the 15 accurately Dave does water jet cutting on materials over 20mm, I think up to 100mm! Cirrus Laser. Quote Link to comment Share on other sites More sharing options...
landrover598 Posted March 29, 2007 Share Posted March 29, 2007 We've had 25mm sample parts water cut and they looked good, but the tollerance was way out We cut up to 100 with the profile burner and it cuts surprisingly neat. Quote Link to comment Share on other sites More sharing options...
nas90 Posted March 29, 2007 Share Posted March 29, 2007 What are your lazers like at cutting thicker than 20mm ? I've got to find where i work a company who can cut 20+The people we use now can't do more the 15 accurately From 4mm inclusive upto and including 12.5mm we use pickled and oiled 43A / S275 or mill pickled HRP4 for a good cut quality. After 12.5mm thickness we switch to Raex http://www.hartox.com.pl/upload_files/tech...f4c04a39e708bea but just the Mild Steel variety, this has low Silicon and cuts very well in 15mm and 20mm thickness, although being dry (not pickled and oiled) can be difficult with small features. Above 20mm and upto 100mm we use water jet, using the latest dynamic head to eliminate cutting taper which was always a problem with this process here http://www.flowcorp.com/waterjet-resources.cfm?id=359 Quote Link to comment Share on other sites More sharing options...
bishbosh Posted March 30, 2007 Share Posted March 30, 2007 Oi you lot, quieten down!!! All this talk about 20mm will have Nige in palpitations..... Quote Link to comment Share on other sites More sharing options...
landrover598 Posted March 30, 2007 Share Posted March 30, 2007 All this talk about 20mm will have Nige in palpitations..... He'd have had a heart attack if he saw the delivery we had on Tuesday, 22.5 tons of steel plates, 25mm to 50mm Quote Link to comment Share on other sites More sharing options...
Orgasmic Farmer Posted March 30, 2007 Share Posted March 30, 2007 NIce Axles Nick. Would have looked nice under my Disco : :lol: Quote Link to comment Share on other sites More sharing options...
reads90 Posted March 30, 2007 Share Posted March 30, 2007 NIce Axles Nick. Would have looked nice under my Disco : :lol: Hope fully a set of thoses will soon look nice under my Disco Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.