russ1 Posted April 23, 2007 Share Posted April 23, 2007 Has anyone used these? Are they any good looking in to buying them, i can weld them on no problem. What do people think of them. Quote Link to comment Share on other sites More sharing options...
Orgasmic Farmer Posted April 23, 2007 Share Posted April 23, 2007 Steve is running them on the challenge truck with no problems. Biggest worry, but same for all, is the incredible number of bolts you have to do up each time you change a tyre..... Quote Link to comment Share on other sites More sharing options...
simonr Posted April 24, 2007 Share Posted April 24, 2007 Can't say how they perform, but they are exceptional value! Nick Watts & I had some cut (By NAS90 on here) and once you add the bolts, they are only a few quid cheaper. They cannot be making anything on them. I'd take advantage while you can! Si Quote Link to comment Share on other sites More sharing options...
chuck Posted May 12, 2007 Share Posted May 12, 2007 i was thinking about fitting a set of these to some mach 5s... can anyone see a reason why i couldn't or shouldn't?? thanks for any help Quote Link to comment Share on other sites More sharing options...
SteveG Posted May 13, 2007 Share Posted May 13, 2007 i was thinking about fitting a set of these to some mach 5s... can anyone see a reason why i couldn't or shouldn't?? Yes, sell the mach 5's and buy their double beadlock wheels instead. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.