Jump to content
Sign in to follow this  
westcoastlandy

101 rear crossmember

Recommended Posts

We had to do ours, unfortunately we didnt take any picks.

We got ours form the 101 club, nicely made.

it took 2 days with an angle grinder and big hammer.

we took the rear load bay off as well which made life alot easier.

its no worse than doing it on a series.. its jsut on a bigger scale.

Share this post


Link to post
Share on other sites

When I did mine replacement chassis parts weren't available so I had to make my own (this was back in about 1993).

Luckily I had access to a fully equipped workshop at the time and I made up a new cross-memebr from scratch and though I say it myself, I don't think you could tell the difference from my finished product and an original one.

The biggest problem is that there are several layers of metal which makes for quite a complex structure and if the rot has really taken hold then it all has to be replaced. Having said all that, now replacements are available it will be a much easier job for you with none of the fabrication I had to go through.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy