andy.cowman Posted April 10 Share Posted April 10 (edited) Thanks @PaulMc could you please send out a spare 16 and 20 and the ends? I think I pretty much have everything now - but I got distracted traipsing across the country yesterday! 270 miles in the defender.... I did pick up a rear seat for the 90 though, will see how we go fitting that in! Edited April 10 by andy.cowman Quote Link to comment Share on other sites More sharing options...
PaulMc Posted April 10 Share Posted April 10 7 hours ago, andy.cowman said: Thanks @PaulMc could you please send out a spare 16 and 20 and the ends? I think I pretty much have everything now - but I got distracted traipsing across the country yesterday! 270 miles in the defender.... I did pick up a rear seat for the 90 though, will see how we go fitting that in! Posted off this afternoon 👍 1 Quote Link to comment Share on other sites More sharing options...
andy.cowman Posted April 10 Share Posted April 10 1 hour ago, PaulMc said: Posted off this afternoon 👍 Thanks Paul! Good progress just now - I have done the ROW modification for the temp sensor (I have the 300tdi sensor and the adaptors to put it in the 200tdi! The main big plug is all done ready for matching up the cables to my loom The 16 pin plug is done as well The transducer now has a nice new plug and it fits on the end as well! I just need to do the 20pin plug - pretty much all the cables are crimped up waiting for the bit to arrive - and then fit it all Quote Link to comment Share on other sites More sharing options...
andy.cowman Posted April 19 Share Posted April 19 Afternoon all - a quick update to say its all in and done! Thank you to everyone who helped me along the way with this, and for the brilliant website with instructions! Some extra bits got replaced as well, I have rewired the fuel sender, a new indicator stalk and hazard switch went in to! Very pleased with the outcome. I now have until October to sort out the reading on the odometre! 3 Quote Link to comment Share on other sites More sharing options...
western Posted April 21 Share Posted April 21 I sent my Td5 speedo to digidash along with a photo of the original speedo mileage reading, he put my Td5 speedo to the same & sent it back within 7 days 2 Quote Link to comment Share on other sites More sharing options...
=jon= Posted May 14 Share Posted May 14 On 7/4/2007 at 6:38 PM, imperadeiro said: http://i210.photobucket.com/albums/bb242/imperadeiro/C1060.jpg Quick question for anyone that knows how the TD5 speedo head works - the output pin 1 - Doubles the single to send to the ECU - from what I can tell this is for the cruise control / speed limiter. Is it known if this is a 12v or a 5v pulse? I'm looking for a speed input to my ECU, if it's 5V I can hook it up to a digital input, if not then smoke will escape if I don't drop the voltage... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.