Paul64 Posted June 23, 2007 Posted June 23, 2007 Hi, I have been having loads of trouble shutting the passenger door on my Defender 110. I have changed the seals and even taken the door off and refitted it. Rejo sent me this article and after 1 minute the problem was solved. I never thought to look at the latch as assumed it would be static. Cheers, Paul. http://www.difflock.com/magazine/Modificat...der_doors.shtml Quote
Mo Murphy Posted June 23, 2007 Posted June 23, 2007 That's why it has screws and moves Paul, cunning eh ? Mo Quote
Paul64 Posted June 23, 2007 Author Posted June 23, 2007 That's why it has screws and moves Paul, cunning eh ? Mo I thought they were there to get the latch on and off, not to maneuver backward and forward. Please excuse me for my ignorance. Quote
disco tony Posted June 23, 2007 Posted June 23, 2007 liked this bit though! Just a quick note regarding shut lines on a Land Rover Defender . . . In the early 80's it was widely reported that Mitsubishi wanted to test the effectiveness of the door seals on the Shogun both to prevent water ingress during wading and to keep out the sand when entering the various desert races they had entered. All their measuring equipment proved inconclusive so they locked a cat into the vehicle and went away for a few hours. When they later returned the cat had suffocated, neatly proving that the air-tight security of the Sogun was satisfactory. Not wanting to be outdone the men-in-brown-overalls at Solihull decided to try the same experiment with the (then) new 90 and 110. A scraggy moggy was obtained and locked into a Land Rover fresh of the line. The engineers firstly ensured that all doors and windows were firmly closed then went to lunch. When they returned the cat had escaped! So maybe those gaping shut-lines on your motor are a design feature? Quote
Guest MJG Posted June 23, 2007 Posted June 23, 2007 liked this bit though!Just a quick note regarding shut lines on a Land Rover Defender . . . In the early 80's it was widely reported that Mitsubishi wanted to test the effectiveness of the door seals on the Shogun both to prevent water ingress during wading and to keep out the sand when entering the various desert races they had entered. All their measuring equipment proved inconclusive so they locked a cat into the vehicle and went away for a few hours. When they later returned the cat had suffocated, neatly proving that the air-tight security of the Sogun was satisfactory. Not wanting to be outdone the men-in-brown-overalls at Solihull decided to try the same experiment with the (then) new 90 and 110. A scraggy moggy was obtained and locked into a Land Rover fresh of the line. The engineers firstly ensured that all doors and windows were firmly closed then went to lunch. When they returned the cat had escaped! So maybe those gaping shut-lines on your motor are a design feature? ROTFL Quote
Guest MJG Posted June 23, 2007 Posted June 23, 2007 liked this bit though!Just a quick note regarding shut lines on a Land Rover Defender . . . In the early 80's it was widely reported that Mitsubishi wanted to test the effectiveness of the door seals on the Shogun both to prevent water ingress during wading and to keep out the sand when entering the various desert races they had entered. All their measuring equipment proved inconclusive so they locked a cat into the vehicle and went away for a few hours. When they later returned the cat had suffocated, neatly proving that the air-tight security of the Sogun was satisfactory. Not wanting to be outdone the men-in-brown-overalls at Solihull decided to try the same experiment with the (then) new 90 and 110. A scraggy moggy was obtained and locked into a Land Rover fresh of the line. The engineers firstly ensured that all doors and windows were firmly closed then went to lunch. When they returned the cat had escaped! So maybe those gaping shut-lines on your motor are a design feature? Quote
Steve King Posted June 24, 2007 Posted June 24, 2007 Is there a way of adjusting out the trouser snagging properties of the lock?? Steve Quote
JSG Posted June 24, 2007 Posted June 24, 2007 Is there a way of adjusting out the trouser snagging properties of the lock?? Steve Been there a few times. It's still a feature of the 07 model as well Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.