rb199 Posted July 19, 2007 Share Posted July 19, 2007 Just a quick one to say thanks for the replies regarding my timing belt woes. My Disco is now back on the road with a full new set of push rods and 3 rocker arms and a new headgasket. Out of interest the belt was installed at about 64500 miles by a Landrover main dealer with the required mod kit (I think) the lip on the Crankshaft pully had been worn off by the belt and the belt had reduced it's thickness by about a third (see photo) when it went at about 109000 miles. Quote Link to comment Share on other sites More sharing options...
JimAttrill Posted July 21, 2007 Share Posted July 21, 2007 Have you fitted a Bearmach forged pulley where the lip is integral or the LR one where the lip is spot-welded on and can either wear through as happened to you or fall off as happened to a mate of mine? ps this is my 500th post, hooray! Quote Link to comment Share on other sites More sharing options...
Les Henson Posted July 21, 2007 Share Posted July 21, 2007 Says 503 over there Jim << Les. Quote Link to comment Share on other sites More sharing options...
JimAttrill Posted July 21, 2007 Share Posted July 21, 2007 well it's dynamic Les, by now it wll be about 505... Quote Link to comment Share on other sites More sharing options...
Les Henson Posted July 22, 2007 Share Posted July 22, 2007 508 actually Les. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.