Jump to content

1.8 engine - drain & refill coolant


Recommended Posts

Since my freebie seems to have plain water in it at the moment, I'm going to drain & refill with some proper anti-freeze. However, someone (probably Jules) told me there's a few bleed points to be used when doing so to ensure the system works OK.

Can anyone point me in the direction of where these may be and what the procedure is (if there is a set one)?

Oh and is the Haynes manual for the freebie worth having or a waste of space? I know how a spanner works, so it's more down to wiring diagrams / specific procedures for doing stuff which sometimes they get right but sometimes gloss over or (irritatingly) refer you to a specialist <_<

Link to post
Share on other sites

Do you have a photo copier as I can lend you a copy but I only used if for finding things.

talk to dave he will have some Rav cd's for your car knocking around if not I have some you can copy

Its somthing to do with the very small water feed at the back of the head but I will let those with more knowladge explane from here.

Link to post
Share on other sites
  • 2 weeks later...

The 1.8 engine is the K-series Rover engine. The cooling system has to be bled if it has been drained. I start the engine and slowly fill it with the engine ticking over. The bleed valve is on the Passenger side - under the coil pack. There's a thin pipe coming from the inlet manifold to the header tank and a couple of times I have had to remove the pipe and unblock the short metal piece that sticks out with a small screwdriver - you should be getting a small flow of water out of there.

Les.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy