SteveG Posted November 19, 2007 Share Posted November 19, 2007 Is it 36 or 48 spline? Thanks Steve Quote Link to comment Share on other sites More sharing options...
western Posted November 19, 2007 Share Posted November 19, 2007 if the vehicle is a County or XS it should have a 36 spline column or if it's a standard Station wagon or hardtop or pick up/hi-cap it'll have the 48 spline 300Tdi column. Quote Link to comment Share on other sites More sharing options...
NicTheOrange90 Posted November 19, 2007 Share Posted November 19, 2007 if the vehicle is a County or XS it should have a 36 spline column or if it's a standard Station wagon or hardtop or pick up/hi-cap it'll have the 48 spline 300Tdi column. This might help... http://www.qtservices.co.uk/region.asp?id=333 I have two bosses from them, and one wheel, the other wheel I got from Eblag. Any MOMO wheel will fit. Quote Link to comment Share on other sites More sharing options...
SteveG Posted November 19, 2007 Author Share Posted November 19, 2007 if the vehicle is a County or XS it should have a 36 spline column or if it's a standard Station wagon or hardtop or pick up/hi-cap it'll have the 48 spline 300Tdi column. thanks Ralph, it was a base truck cab so 48 spline. Good job as that's what I'd ordered, BA 3201 as per Kev's post. I had a look in Rave and there was no mention of number splines on columns and that different models had different columns, which is unusual. Thanks again Steve Quote Link to comment Share on other sites More sharing options...
western Posted November 19, 2007 Share Posted November 19, 2007 this might help steering wheel fitments thick = 48 spline thin = 36 spline Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.