darzo Posted December 11, 2007 Share Posted December 11, 2007 Hi there Yesterday I bought a TD4 HSE Auto on a 54 plate. Not actually sure if I like it yet, am hoping it will grow on me! I took delivery this morning of a pair of side steps (the genuine LR ones) and encountered two problems, one being the 'special' tool that you are meant to use to fit them - a M6 Rivnut/Nutsert which I obviously don't have, spoke to Brooklands who said it can be remedied with a longer bolt etc which I understand and can deal with. The only other thing is that there are supposed to be predrilled holes in the sill and the chassis, found the chassis ones ok but cannot find the ones on the sills? Does that mean I have to drill them myself? Thanks in advance for any help and I hope to be a regular poster. Cheers, Darren Quote Link to comment Share on other sites More sharing options...
Marc1187 Posted December 11, 2007 Share Posted December 11, 2007 The holes will be on your sills but should be covered with a circuler sticker if it hasnt had side steps in the past. If you can find the holes further inboard on the chassis they are directly opposite on the sill. No drilling is required. Quote Link to comment Share on other sites More sharing options...
darzo Posted December 12, 2007 Author Share Posted December 12, 2007 The holes will be on your sills but should be covered with a circuler sticker if it hasnt had side steps in the past. If you can find the holes further inboard on the chassis they are directly opposite on the sill. No drilling is required. Cheers Marc, I'll have another look when it warms up a bit! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.