Les Henson Posted February 5, 2008 Share Posted February 5, 2008 Some of you must have badly re-shaped crossmembers (any of them), so how about a competition for who has the bendiest one still on their truck? Mr Jenkins 90 - not too bad really If I remember right, Mr Murphys crossmember is a potential prize-winner Les. Quote Link to comment Share on other sites More sharing options...
white90 Posted February 5, 2008 Share Posted February 5, 2008 Exmoor Beasts will take the prize Quote Link to comment Share on other sites More sharing options...
V8CAMEL Posted February 5, 2008 Share Posted February 5, 2008 Exmoor Beasts will take the prize are there any rules for this? i will take a foto of the series one at the weekend. Quote Link to comment Share on other sites More sharing options...
Jon White Posted February 5, 2008 Share Posted February 5, 2008 Dammit I just cut mine off!!!! I reckon my rear crossmember was pretty spectacular when Nige B's Mahoosive hydraulic winch failed to winch me out.........dont know if he took a piccy of it though....... Jon Quote Link to comment Share on other sites More sharing options...
will_warne Posted February 5, 2008 Share Posted February 5, 2008 I think I've got centre section of the one I wrecked at Tony's birthday bash a couple of years ago lying aroung the workshop. The stump that did it also bent the steering gaurd rather badly too... Quote Link to comment Share on other sites More sharing options...
Milemarker Type S Posted February 5, 2008 Share Posted February 5, 2008 Doh! Was under mine today and forgot to take a photo... Could well be a contender! Had to get under it today to do a few repairs....1. Replace the pan hard rod bushes- 3rd set in 12 months!- Now trying Super Pro which are supposed to be guaranteed for 3 years- time will tell... 2. Straighten the front diff guard... again- anyone know of a better/ stronger one than the old style QT Services one- is the new one any stronger? It has done its job in that my diff is still intact but is a big pain to straighten... New one required or I might reinforce this one! 3. Chop off the front chassis jacking points- don't use them and they are lower than my tubular bumper so they gotta go! Will get a photo and enter dreckly! Shrek Quote Link to comment Share on other sites More sharing options...
hattymender Posted February 5, 2008 Share Posted February 5, 2008 Does most welded up 110 cross member qualify for this? Rich Quote Link to comment Share on other sites More sharing options...
Mo Murphy Posted February 6, 2008 Share Posted February 6, 2008 Mine has a bashed sump too, will that enhance my chances ? I'll take a photo later Mo Quote Link to comment Share on other sites More sharing options...
BoatBuoy Posted February 6, 2008 Share Posted February 6, 2008 I ripped the stupid plastic drain plug off my fuel filter yesterday. What a stupid place to put a filter, by the back wheel. But an m10 bolt sealed the hole. Quote Link to comment Share on other sites More sharing options...
landrover598 Posted February 6, 2008 Share Posted February 6, 2008 Mine is still straight as a die, after two years of off road use, mainly due to the 6mm plate i covered it in Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.