k9unit Posted February 28, 2008 Share Posted February 28, 2008 i have a 300tdi can i adjust the tappetts or are they hydrolic. paul Quote Link to comment Share on other sites More sharing options...
Les Henson Posted February 28, 2008 Share Posted February 28, 2008 You can adjust them in the normal way with feeler guage blades. Clearances are (inlet and exhaust) are .020 mm Adjust - No3 with No6 open .................5...........4 .................2...........7 .................8...........1 .................6...........3 .................4...........5 .................7...........2 Les. Quote Link to comment Share on other sites More sharing options...
k9unit Posted February 28, 2008 Author Share Posted February 28, 2008 cheers mate paul Quote Link to comment Share on other sites More sharing options...
JimAttrill Posted March 3, 2008 Share Posted March 3, 2008 It's called the 'rule of 9', so is handy for those who count on their fingers Oh, and a tip to make it easy, put the gearbox in 5th and jack up the passenger side wheel. You can then turn the engine easily by turning the front wheel and watch the rockers at the same time. Quote Link to comment Share on other sites More sharing options...
stuntman Posted March 3, 2008 Share Posted March 3, 2008 Thanks, the wheel trick is VERY useful Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.