m&mv80 Posted March 3, 2008 Share Posted March 3, 2008 what ones are you using at the axle end? im running rose jointed trailing arms and it seems to me that the amount of axle travel is causing to much twist in the bushes and now they need replacing im currently using genuine landrover ones as i was hoping they would be good enough but it seems not, would polybushes help? what are your opinions? thanks martin Quote Link to comment Share on other sites More sharing options...
Hybrid_From_Hell Posted March 3, 2008 Share Posted March 3, 2008 I use genuine now - I killed my polybushes in less than 1 yr Nige Quote Link to comment Share on other sites More sharing options...
carl hurst Posted March 3, 2008 Share Posted March 3, 2008 Standard Bush's are pretty good and cheep,check that the rose ends are not binding up and causing any stress on arms. Quote Link to comment Share on other sites More sharing options...
Paul Wightman Posted March 3, 2008 Share Posted March 3, 2008 Are you sure your rose joints are not binding? I know others who leave the lock nut loose to allow full travel. I have never had a problem with the axle bush and was achieving reasonable articulation. I used red polybushes. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.