steveh74 Posted June 18, 2008 Share Posted June 18, 2008 Hi Guys, Another newbie here, first post (and first Freebie!) Anyways, the model I have bought is the ES 2ltr TD4 on a 52 plate. Everything works fine (so far) apart from the fog/spot lights built into the soft nudge bar at the front. There is a switch on the console next to the normal fog lights (which work fine) which lights up when activated, however the switch next to it (with a number 2 on it) doesn't light up nor do the lights come on. I am going to have a good look at it at the weekend, but wondered if anyone had any obvious ideas what is wrong with them? Thanks in Advance steveh74 Quote Link to comment Share on other sites More sharing options...
Llanigraham Posted June 18, 2008 Share Posted June 18, 2008 If they are on a soft nudge bar, make sure they are earthed seperately, as I doubt the 'bar will provide an earth path. Quote Link to comment Share on other sites More sharing options...
muddy_muppet Posted June 19, 2008 Share Posted June 19, 2008 Do you need main beam on for those spots to work? Quote Link to comment Share on other sites More sharing options...
DEANO3528 Posted June 19, 2008 Share Posted June 19, 2008 Do you need main beam on for those spots to work? That would be the legal requirement I think you'll find Quote Link to comment Share on other sites More sharing options...
steveh74 Posted June 20, 2008 Author Share Posted June 20, 2008 Guys, Thanks for that you are absolutely right. The switch needs to be depressed all the time, and then when you flash someone or put your full beam on you can blind them good and proper! Thanks again! steveh74 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.