ROGUE TROOPER Posted July 26, 2008 Share Posted July 26, 2008 Tried to fit a new one to the back of my 2a today (11 inch brakes) but the new ones are way bigger than the one I took out! IIs there something wrong, have i got the wrong seal or have bearmach made them 10mm too big!!! Thanks Quote Link to comment Share on other sites More sharing options...
Les Henson Posted July 27, 2008 Share Posted July 27, 2008 I believe the number is RTC3511 Richard (not sure though). I didn't think they fitted series vehicles though - just 90/110 onwards? Les. Quote Link to comment Share on other sites More sharing options...
minivin Posted July 27, 2008 Share Posted July 27, 2008 Weird, IPC says RTC 3510 upto 1980 for 88" front and back hub. Front hub from 1980 onwards utilises RTC 3511. Quote Link to comment Share on other sites More sharing options...
ROGUE TROOPER Posted July 27, 2008 Author Share Posted July 27, 2008 thanks all Makes me wonder if I have early 90/110 hubs! Will dig out the old series 2 that rob sold me and see if they fit!! Quote Link to comment Share on other sites More sharing options...
ROGUE TROOPER Posted July 27, 2008 Author Share Posted July 27, 2008 Took the ones off a Series 2 and they are the RTC3510. Looks like mine are Defender ones or >80, so I will have tor order RTC3511 tomorrow!!! Quote Link to comment Share on other sites More sharing options...
TonkaIIa Posted July 27, 2008 Share Posted July 27, 2008 Hi ROGUE TROOPER, Was just reading through this thread, I've just ordered these seals (RTC3510) for my rear axle strip-down and was wondering if you could tell me the size they are, just incase I need to order the RTC3511 seals. Cheers Gary Quote Link to comment Share on other sites More sharing options...
Phil Hancock Posted July 27, 2008 Share Posted July 27, 2008 RTC3510 fit the hubs with 2 different size bearings, pre 1980. RTC3511 fit the hubs with both bearings the same size, 1980 on. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.