mucdup3.5 Posted August 6, 2008 Share Posted August 6, 2008 Hi all, fuel problem I had is fixed well on the fuel filter side anyway. I have looked across the top of the tank and it seems like the fuel pump flexible to fuel line might be kinked but not sure - I don't really want to drop the tank. Might this be the cause of a starting problem which is afflicting the beast. There was a very good supply of fuel before I fixed the leak sprayed out every where!! It starts fine from cold, but as soon as i go back to it after stopping sometimes 15 mins sometimes 2hrs or so it just wont fire up? Any ideas pleeease !!! I've looked at the dizzie the relays, leads etc and all look brand new. It seems like it might be in the ecu which still has it seals tags on. Does the ecu have fault codes? How long does the ecu take to reset if the power supply is removed? Thanks everybody. Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted August 6, 2008 Share Posted August 6, 2008 What vehicle, year, engine? Quote Link to comment Share on other sites More sharing options...
DEANO3528 Posted August 6, 2008 Share Posted August 6, 2008 It's this one mate http://forums.lr4x4.com/index.php?showtopic=29293&hl= Quote Link to comment Share on other sites More sharing options...
Muther Trucker Posted August 6, 2008 Share Posted August 6, 2008 next time it wont start remove a spark plug and see if they`re wet with petrol... if they are wipe them off + mop the holes out with a rag, put the plugs back + see if it starts... if it does i`d start by looking at the coil.... Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted August 6, 2008 Share Posted August 6, 2008 It's this one mate So is that a flapper or hotwire? I'd look at the ignition amp. Quote Link to comment Share on other sites More sharing options...
mucdup3.5 Posted August 6, 2008 Author Share Posted August 6, 2008 Hi all, Sorry it's a RR3.5 efi flapper. Thanks for the ideas so far. I will have a look at those items i.e. plugs, coil and ignition amp. When it's cold it starts fine with plenty of revs and goes fine initially, and it only plays up when I stop and try to start it again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.