bosshogg55 Posted October 8, 2008 Share Posted October 8, 2008 Does anyone know where I can get inner sills for a defender the ones that connect from the bulkhead to the tub, or are they just called something else and Im missing them? cheers all that are wise! Quote Link to comment Share on other sites More sharing options...
LR90 Posted October 11, 2008 Share Posted October 11, 2008 The outer alloy trim panel (~3" deep) or the steel rail that the floor panels bolt down onto? Quote Link to comment Share on other sites More sharing options...
bosshogg55 Posted October 12, 2008 Author Share Posted October 12, 2008 The outer alloy trim panel (~3" deep) or the steel rail that the floor panels bolt down onto? Yes its the steel rail that the floor bolts too I'm looking for.... Quote Link to comment Share on other sites More sharing options...
LR90 Posted October 12, 2008 Share Posted October 12, 2008 OK, Ralph (Western) on here is your man to get a part no. and with that you can find suppliers. Though if I understand it right these used to be galv'd on earlier models so you may do better to look for a s/h set rather than buy new. Quote Link to comment Share on other sites More sharing options...
Early90 Posted October 12, 2008 Share Posted October 12, 2008 Does anyone know where I can get inner sills for a defender the ones that connect from the bulkhead to the tub, or are they just called something else and Im missing them? cheers all that are wise! part no.s were MWC1086 O/S and MWC1087 N/S when i did mine last year and they came Galv. Quote Link to comment Share on other sites More sharing options...
bosshogg55 Posted October 12, 2008 Author Share Posted October 12, 2008 part no.s were MWC1086 O/S and MWC1087 N/S when i did mine last year and they came Galv. You have proven yourself wise OH mighty Early90! well done, and thanks.... Quote Link to comment Share on other sites More sharing options...
Early90 Posted October 13, 2008 Share Posted October 13, 2008 You have proven yourself wise OH mighty Early90! well done, and thanks.... Get the brackets that attatch the sill to the `b`post ,if the sills are rotten then they probably are aswell........ part no 347436 same both sides...only a couple of quid each and worth it if only to not have to bother removing the old ones from the old sills. Have some cage nuts (m6 i think) x4 to fix brackets to b post. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.