fender1234 Posted October 9, 2008 Share Posted October 9, 2008 hi, over the past few days my reverse gear (lt77) in the 90 has gone quite stiff. Its hard to explain but its not getting it into reverse but the moving it across through the gate if that makes sense. any ideas things that can be adjusted im hoping. cheers Quote Link to comment Share on other sites More sharing options...
BogMonster Posted October 9, 2008 Share Posted October 9, 2008 I seem to remember (from drowning an old 90 in a river ) that something in the reverse can get seized up and cause issues, others might be able to throw more light on the problem (I didn't fix ours, somebody else did as it was years ago now) Quote Link to comment Share on other sites More sharing options...
fender1234 Posted October 9, 2008 Author Share Posted October 9, 2008 I seem to remember (from drowning an old 90 in a river ) that something in the reverse can get seized up and cause issues, others might be able to throw more light on the problem (I didn't fix ours, somebody else did as it was years ago now) cheers bogmonster, hopefully someone will shed some light on the situation Quote Link to comment Share on other sites More sharing options...
ciappi Posted October 10, 2008 Share Posted October 10, 2008 check the gear liver from top of the box maybe needs some adjustment and check if there is alot of freeplay as the aluminum part get eaten from the sides and again on top on the right there is the sping were holds the lever to stop maybe needs replace sorry if cannot explane easier Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.