GBMUD Posted February 13, 2006 Share Posted February 13, 2006 Mmm, pricey! Car exhaust U-clamps can be had for 50p or less, come in a variety of sizes and, when combined with 8mm penny washers, fit in exactly the same way. Chis Quote Link to comment Share on other sites More sharing options...
mmgemini Posted February 13, 2006 Share Posted February 13, 2006 I knew that was gonna be asked, I'll dig out a number, can be used on any LR, IIRC their military parts but any LR dealer/independent supplier should be able to get them. Right found the numbers RRC3588 & RRC3674 plus nyloc nuts IIRC the loop is RRC3588 & the backing plates RRC3674 the older type that minivin has are LR part number 395104 hope that helps 395104. How many would you like??? Assuming I can find them You need angle iron under them as per the MOD series. I eat rat pioson mike I can cause trouble in an empty house !! Quote Link to comment Share on other sites More sharing options...
western Posted February 13, 2006 Share Posted February 13, 2006 Just rang Land Rover dealer to get a price and the loops (RRC3588) are £10 each! the backing plates are 40p each.... Mark Heck, Don't think I paid that much for mine Quote Link to comment Share on other sites More sharing options...
landrover598 Posted February 13, 2006 Author Share Posted February 13, 2006 I went to fit the disco 2 type eyes today, but can't find any M8 bolts shorter than 100mm I'll have to buy some shorter bolts tommorow and fit them then Quote Link to comment Share on other sites More sharing options...
landrover598 Posted February 14, 2006 Author Share Posted February 14, 2006 Job done Thanks for the ideas guys B) Quote Link to comment Share on other sites More sharing options...
western Posted February 14, 2006 Share Posted February 14, 2006 it's far to clean Quote Link to comment Share on other sites More sharing options...
landrover598 Posted February 14, 2006 Author Share Posted February 14, 2006 The landy was only built a few months ago, give us a change Quote Link to comment Share on other sites More sharing options...
PaulMc Posted February 14, 2006 Share Posted February 14, 2006 Ralph's rings are the Military 90/110 parts, here's an extract from the Military parts book - Also available are the Cam Net stowage tie-downs from the roof of the Winterised Hard Top - John Craddock lists the following - Part Number : RRC3588 - LASHING CLEAT 90/110 MILITARY VEHICLES - £6.61 + VAT (but not the Cam Net rings or the angle plates) They also list - Part Number : 395104 - LASHING CLEAT REAR BODY FLOOR WHEEL ARCH BOX TOP & FRONT PILLARS 101FC - £1.61 + VAT Paul. Quote Link to comment Share on other sites More sharing options...
western Posted February 14, 2006 Share Posted February 14, 2006 Yep that's 'em, have the angle plates for all mine as well, just haven't got the 2 types of washers, the rubber ones might be worth adding to my 4 I've fitted, I 've got 4 of the 395104's as well, can't remember where I got the from. Quote Link to comment Share on other sites More sharing options...
PaulMc Posted February 15, 2006 Share Posted February 15, 2006 Yep that's 'em, have the angle plates for all mine as well, just haven't got the 2 types of washers, the rubber ones might be worth adding to my 4 I've fitted, I 've got 4 of the 395104's as well, can't remember where I got the from. Ralph, The washers (one steel, one rubber) are only fitted to the Cam Net tie-downs. This is because they're on the Hard Top roof and they're there to prevent leaks I've got lots of RRC3588 and the angle plates, also quite a few 395104. I REMEmber exactly where I got them and how much I paid for them Paul. Quote Link to comment Share on other sites More sharing options...
mmgemini Posted February 15, 2006 Share Posted February 15, 2006 Ralph,The washers (one steel, one rubber) are only fitted to the Cam Net tie-downs. This is because they're on the Hard Top roof and they're there to prevent leaks I've got lots of RRC3588 and the angle plates, also quite a few 395104. I REMEmber exactly where I got them and how much I paid for them Paul. Good old REMEdy again. I eat rat poison mike I can cause trouble in an empty house !! Quote Link to comment Share on other sites More sharing options...
western Posted February 15, 2006 Share Posted February 15, 2006 I REMEmber exactly where I got them OK now I know too, I won't bother with the rubber washers then. Quote Link to comment Share on other sites More sharing options...
tiagoc Posted February 16, 2006 Share Posted February 16, 2006 Job doneThanks for the ideas guys B) very nice! btw, and sorry for the OT, where did your seats (driver and passenger) come from? Quote Link to comment Share on other sites More sharing options...
landrover598 Posted February 16, 2006 Author Share Posted February 16, 2006 The passengers seat is standard Defender, the drivers seat is standard Range Rover Classic I will get around to changing the passengers one to the Range Rover seat sat in the garage, one day, honest Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.