muddyplugger Posted February 7, 2006 Share Posted February 7, 2006 Before getting dirty, this time I am going to research exactly what I need and what I need to do before undertaking a 'simple' job!!! (out of character for me) I've had a look in the workshop manual and it says "ABS sensor is supplied fitted to the wheel hub must not be removed", well it doesn't say MUST NOT be removed!! Surely there must be a way of removing the sensor without removing the brake disc, releasing the wheel hub and all the hours of turmoil that goes with it to replace a natty plug????? I'm sure someone has done this 3 or 4 times and has some tips on 'How to replace the ABS sensor in under 20 minutes' [1 spanner job] ...... please??? Quote Link to comment Share on other sites More sharing options...
muddyplugger Posted February 9, 2006 Author Share Posted February 9, 2006 Come on......someone must have some idea? [/tumbleweed mode off] Quote Link to comment Share on other sites More sharing options...
BogMonster Posted February 9, 2006 Share Posted February 9, 2006 If it is like the old ones it probably just pulls out and is just a tight sliding fit in the hole (ooer) so if you can get a pair of pliers on the back of it (mind the lead) give it a heave and see what happens. I think somebody at work had one out a while back but I didn't see it, if it is B****ered then you ain't got much to lose. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.