The Novice Posted January 23, 2009 Share Posted January 23, 2009 My 110 has decided to carry out a bit of under body self lubrication, it spraying oil out of the hand brake leaving a lovely oil sheen underneath. From looking through previous threads I'm guessing its the transfer box oil seal so I'll change that. Is there anything else i should look at or change while I'm doing it, such as the bearing itself. I also noticed there is oil leaking from the transfer box cover plate. Is this just a case of new gasket or do i need to look elsewhere. All advice much appreciated. Quote Link to comment Share on other sites More sharing options...
fender1234 Posted January 23, 2009 Share Posted January 23, 2009 might be worth cleaning up the handbrake parts as they will be covered in oil, and i suppose you could check the output bearing from play etc Quote Link to comment Share on other sites More sharing options...
The Novice Posted January 23, 2009 Author Share Posted January 23, 2009 Thanks. Will probably get new shoes for it and clean the drum up. Quote Link to comment Share on other sites More sharing options...
fender1234 Posted January 23, 2009 Share Posted January 23, 2009 the cover plate gasket is part no. FRC7998 i think Quote Link to comment Share on other sites More sharing options...
The Novice Posted January 24, 2009 Author Share Posted January 24, 2009 Thanks, Could anyone help with part numbers for the brake shoes and oil seal. Its a 1989 110 sw. Quote Link to comment Share on other sites More sharing options...
western Posted January 24, 2009 Share Posted January 24, 2009 rear output seal FRC7043 brake shoes RTC3403 friction material rivetted on upto July 1989 vehicles RTC6179 friction material bonded on from July 1989 vehicles hth Quote Link to comment Share on other sites More sharing options...
The Novice Posted January 31, 2009 Author Share Posted January 31, 2009 Thanks for the numbers western, I'm just about to order the parts as i've got a few days off this month. I'm thinking of getting a new bearing just in case but am struggleing to find the right number for it, any help much appreciated (chassis No EA323114). Changing the front prop shaft UJ's aswell should i replace the nuts when doing this. Quote Link to comment Share on other sites More sharing options...
western Posted January 31, 2009 Share Posted January 31, 2009 rear output bearing is stc1130 for a LT230, it's a good move to replace nyloc nuts. Quote Link to comment Share on other sites More sharing options...
The Novice Posted January 31, 2009 Author Share Posted January 31, 2009 Cheers western, Thanks again for your help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.