bluespanner Posted February 17, 2009 Share Posted February 17, 2009 I have a disco 200tdi in my truck, and a dead 2.5Td under the bench. Could I bolt the manifolds off the Td onto the Tdi? They cook compatible, although the turbo looks a bit different.... I'd much rather have the defender style setup Cheers Roland Quote Link to comment Share on other sites More sharing options...
Monster Posted February 17, 2009 Share Posted February 17, 2009 This may interest you. http://www.serie2a.dk/English%20series2a/2...%20Defender.htm Quote Link to comment Share on other sites More sharing options...
western Posted February 17, 2009 Share Posted February 17, 2009 maybe a slight mismatch with the head/manifold ports & check all the bolt positions too. Quote Link to comment Share on other sites More sharing options...
poohbear Posted February 17, 2009 Share Posted February 17, 2009 I also have a Tdi in the truck and a TD under the bench - the manifolds don't match I'm afraid - some of the bolt positions are different, I was also looking to swap the turbo and manifolds over. I think the TDi has a bigger turbo as well IIRC. Dave. Quote Link to comment Share on other sites More sharing options...
reb78 Posted February 18, 2009 Share Posted February 18, 2009 Have a look at the link Monster put above - its what i thought of when I read this post. Here it is again: http://www.serie2a.dk/English%20series2a/2...%20Defender.htm Don't know how well it works, but it can be done apparently! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.