Steve 90 Posted March 2, 2009 Share Posted March 2, 2009 Been having an hour going back over some of the stuff ive done and sewing up loose ends. I need to fit the lower semi circle plate to the bell housing but theres a groove along the top of it that makes me think there should be a seal or simmilar in there. I want to keep water out if possible so if there was, that would be great. So does anyone have a diagram of the plate area, Its a 1994 4.2 V8 with auto box. THe plate is just a semi circular blanking plate with part number FRC2859 stamped on it that covers the bottom 1/3rd of the bell housing and mates up against the bottom of the engine block. The seal id be interested in, If there is one, would be between this plate and the bottom of the engine block. CAn anyone help? Cheers. Steve. Quote Link to comment Share on other sites More sharing options...
TOR4x4 Posted March 2, 2009 Share Posted March 2, 2009 try 594087 its a rubber seal Quote Link to comment Share on other sites More sharing options...
western Posted March 2, 2009 Share Posted March 2, 2009 With a bit of help from Microcat Quote Link to comment Share on other sites More sharing options...
Steve 90 Posted March 3, 2009 Author Share Posted March 3, 2009 try 594087 its a rubber seal Thanks fella! Quote Link to comment Share on other sites More sharing options...
Steve 90 Posted March 3, 2009 Author Share Posted March 3, 2009 With a bit of help from Microcat Aye, Thats the kiddy, Thankyou both, Thats brilliant. Quote Link to comment Share on other sites More sharing options...
steve_d Posted March 3, 2009 Share Posted March 3, 2009 You will want to put sealant on all the mating faces anyway if you want to keep wading water out. So, having put silicone over the other faces then and extra large bead along the top in place of this seal will probably suffice. Steve Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.