tblandy Posted April 9, 2009 Share Posted April 9, 2009 Im going to attack an old drum ive got, going to extend and narrow it, im thinking extend around 4-5"? Not sure on what size tube to use for the narrowing? Any help appriciated? Im also going to make some rear trailing arms extended 18"+ with jonny or Hemi joints, wheres the best place to get these and the brackets? Thanks TY Quote Link to comment Share on other sites More sharing options...
zim Posted April 9, 2009 Share Posted April 9, 2009 Gigglepin ( D9OSV posts on here is the boss ) will be the place to sort out the johnny joints You're probably best off having a chat with them about the winch as well. Gordon http://www.gigglepin4x4.net/ Quote Link to comment Share on other sites More sharing options...
tblandy Posted April 9, 2009 Author Share Posted April 9, 2009 I was thinking about these https://ballisticfabrication.3dcartstores.c...int_p_1636.html as i need to order some calliper mounts? No one else done their own winch drum? Thanks Quote Link to comment Share on other sites More sharing options...
tblandy Posted April 9, 2009 Author Share Posted April 9, 2009 Just looked at gigglepins tyhey look ideal, ill give them a bell when I get 5 mins! Cheers Quote Link to comment Share on other sites More sharing options...
will_warne Posted April 9, 2009 Share Posted April 9, 2009 Personally I prefer X-joints to johnny joints as there is no limit on rotation of the arm. As far as drums go - talk to Gigglepin. It's just easier Quote Link to comment Share on other sites More sharing options...
tblandy Posted April 14, 2009 Author Share Posted April 14, 2009 Anyone any ideas how much I should reduce my diameter by ??? Quote Link to comment Share on other sites More sharing options...
jil6939 Posted April 14, 2009 Share Posted April 14, 2009 Speek to jim and while you are there tell him you want one with the rope loop welded on the motor end!!!!!! as most of the rope bunches on the outer end when doing events because punches are always on the passenger side. Tell him you will not charge him for this top secret information Quote Link to comment Share on other sites More sharing options...
tblandy Posted April 15, 2009 Author Share Posted April 15, 2009 In all honestey I feel embarased to ask Jim as I'm making my own and not buying off him. Has no one got one they can measure? I might ask him when I order the main shaft and brakes. Ty Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.