MECCANO Posted April 15, 2009 Share Posted April 15, 2009 I have a bit of a strange request. I'm after a picture looking directly through the front member hole, which the starting handle or even a PTO passes through. I'm trying to get an idea of how the engine sits in other vehicles by looking at the pulley on the front engine, and how central it is tot he pto. I think mine sits a bit low, and hopefully it will give me an idea of if i need to "tweak" things. Thanks in advance Chris Quote Link to comment Share on other sites More sharing options...
kingdong2 Posted April 15, 2009 Share Posted April 15, 2009 the crank pulley should be central maybe your engine and gearbox mounting rubbers are nacked or the bumper is not fitted properly. graham __________________________ 1962 2a swb 200 tdi. Quote Link to comment Share on other sites More sharing options...
MECCANO Posted April 15, 2009 Author Share Posted April 15, 2009 its more likely the engine mounts arent at the right height, as they have been messed around with during its life Quote Link to comment Share on other sites More sharing options...
Quagmire Posted April 15, 2009 Share Posted April 15, 2009 its more likely the engine mounts arent at the right height, as they have been messed around with during its life Is this for the 2.25? I'll take a pic of the s2 if you like before i head out for Prodigy tomorrow night , I would do it after but might not make it out alive! Quote Link to comment Share on other sites More sharing options...
MECCANO Posted April 15, 2009 Author Share Posted April 15, 2009 for both. it should be the same. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.