vinny Posted May 27, 2009 Share Posted May 27, 2009 What is the part bolted on beside the slave cylinder? Is it worth keeping or shall I fit without? Cheers Vinny Quote Link to comment Share on other sites More sharing options...
landkeeper Posted May 27, 2009 Share Posted May 27, 2009 meant to tell you that yesterday B) http://www.island-4x4.co.uk/clutch-damper-...02l-p-1568.html Quote Link to comment Share on other sites More sharing options...
western Posted May 27, 2009 Share Posted May 27, 2009 You can safely remove it & bin it, it's not fitted to 90/110 only seen them on Discovery vehicles. Quote Link to comment Share on other sites More sharing options...
vinny Posted May 27, 2009 Author Share Posted May 27, 2009 Grand so! Quote Link to comment Share on other sites More sharing options...
western Posted May 27, 2009 Share Posted May 27, 2009 It's only fitted to Discovery & RR classic diesel models & it's meant to absorbs the pulses caused by the diesel crankshaft rotation at low rpm. Quote Link to comment Share on other sites More sharing options...
dave g Posted May 27, 2009 Share Posted May 27, 2009 bin it they are not needed removed mine off both discos and the range rover with no problems what so ever Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.