maxtherotti Posted July 26, 2009 Share Posted July 26, 2009 hi all (have done a search on this but couldnt seem to find much??) what paint do you chaps use for painting your chassis and axles? i dont have access to spray equipment so must be brushable looking for gloss black ideally too have heard hammerite chips easy is this the case? thanks rob Quote Link to comment Share on other sites More sharing options...
Anderzander Posted July 26, 2009 Share Posted July 26, 2009 I'm surprised you didn't find anything on a search ..... it's been done to death! Quote Link to comment Share on other sites More sharing options...
adam5809 Posted July 26, 2009 Share Posted July 26, 2009 its not gloss black, i use the Red oxide paint from screwfix, found it to be very tough and cheap too Screwfix then waxoil the hell out of it. being red underneath its easy to see when the wayoil rubs off Quote Link to comment Share on other sites More sharing options...
Aragorn Posted July 26, 2009 Share Posted July 26, 2009 I used QD90 on the rebuild chassis and axles. Quote Link to comment Share on other sites More sharing options...
muddy Posted July 26, 2009 Share Posted July 26, 2009 Zinc rich primer then a coat of chassis black, both paints came from manor coating systems in shipley. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.