stuck Posted August 15, 2009 Share Posted August 15, 2009 Gents, Have made a comm lead to try and establish why my truck is running like poo but cant connect. Lead is a "straight" serial lead using pins 1, 2, 3, 5 & 9. Have tried running "Port Check" but without success. This is on a toughbook with a "real" serial port at comm 1. Any ideas? Thanks, Mick. Quote Link to comment Share on other sites More sharing options...
stuck Posted August 15, 2009 Author Share Posted August 15, 2009 Right Gents, Sorted that one out but I have another problem. I can connect using Tuner Studio but not with MegaTune. I think this is a version issue with the hardware, what project should I be launching? It's a unit I bought from Fridge with edis, when I run portcheck it's identifying it as msns-extra, but I cant see that in the configuration list. Cheers, Mick Quote Link to comment Share on other sites More sharing options...
Hybrid_From_Hell Posted August 15, 2009 Share Posted August 15, 2009 I think Tuner Studio was brought out after MS MS 1 V3 029v use TS and you may have config issues unless you recongig the ini file For basic tuning I would suggest MT and MLV 2.94 Nige Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted August 16, 2009 Share Posted August 16, 2009 Here ye go Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.