Jump to content

New Exhaust


Recommended Posts

After seeing and hearing the new exhaust system under Nige's truck (HFH) a hole in one of the downpipes of my Janspeed headers gave me the opportunity to go and see the guys at Powerspeed and have a system built for my little 110.

Big thanks to Matt for the majority of the hard work and problem solving, and to Dave for helping finish the job and taking the money ! smile.gif

It's hard to describe what happens as the hours tick by, but straight pieces of tubing are shaped, cut, fettled, cut some more, tacked together and then tigged together to make a nice shiny snake under your truck....

Big thanks go out to Luke (LandyMan Luke) who pulled the headers off his project truck at 23:00 Wednesday night and then drove to meet me at Cannock for 01:00 Thursday morning. I managed a total of 2 hours sleep before heading to Ashford to have the exhaust built. Bit of a long story, but I had headers that weren't going to work for the project, so instead of letting Dave at Powerspeed down after he'd set the day aside for me, Luke convinced me(Without much effort) that a bit of madness was in order and 250 miles later I had headers for the exhaust !

post-1475-125512172774_thumb.jpg

post-1475-125512172976_thumb.jpg

post-1475-125512173155_thumb.jpg

post-1475-125512173311_thumb.jpg

post-1475-125512173506_thumb.jpg

post-1475-125512173686_thumb.jpg

post-1475-125512173839_thumb.jpg

post-1475-125512174015_thumb.jpg

post-1475-125512174208_thumb.jpg

post-1475-125512172551_thumb.jpg

post-1475-125512185177_thumb.jpg

post-1475-125512185333_thumb.jpg

post-1475-125512185527_thumb.jpg

post-1475-125512185708_thumb.jpg

post-1475-125512185901_thumb.jpg

post-1475-125512186105_thumb.jpg

post-1475-125512186308_thumb.jpg

post-1475-125512186494_thumb.jpg

post-1475-125512186663_thumb.jpg

post-1475-12551218496_thumb.jpg

post-1475-125512193107_thumb.jpg

After arriving early and leaving late I had a truck that sounded so different. A bit of mapping and tuning needed now to really see what has changed. It sounds sooooo good....

First opportunity to hear it in a tunnel was Dartford....

Enjoy

Neil

Link to comment
Share on other sites

He'll prob say £32.87 + Vat,

:rofl:

Nige

Nige i believe the question was relating to the cost of the exhaust not to the amount of fuel used during that clip :)

Will *disappearing in a cloud of over fueling sootyness* :ph34r:

Link to comment
Share on other sites

I'll not disclose costs in open forum in case one of you is sleeping with Mrs Freak....

Knowing the prices of stock systems, it was more expensive, but it was built for the truck, designed to give me some more torque for high end cruise on overdrive and a nice rumble.

It will probably out last the truck unlike the Janspeed "stainless" headers that were only 6 years old.

So for me, it's great value and if it delivers the torque once it's re-tuned I'll be a very happy chappie.

When you drive sensibly (which happens rarely....) it's just a pleaseant rumble under the truck.. Nice and deep.

When your press "loud" it obeys nicely...

Neil

Link to comment
Share on other sites

Very nice Neil.

I am not really a massive fan of that V8 sound, but that does sound very nice indeed.

I have used Powerflow several times now, both here in the UK, and in South Africa where the parent company Noise Boys originate from. Every time I have used them, I have nothing but praise for them & their work. If the results you get after completing the re-map of the V8 are anything like the results I got after the re-map of my very tuned Toyota I had in SA, then be prepared to be a very happy boy!

Be careful though. You will be grinning like an idiot most of the time, and there is a risk that the top of your head may come adrift.

Martin

Edited to say: I really should read more carefully. You went to Powerspeed NOT Powerflow.

Link to comment
Share on other sites

Martin, I think you need to take more water with whatever you are drinking matey! :)

Powerspeed clearly at the top of the thread ! ;) <Hic>

As for the losing the top of my head.... Physically my head or are you referring to one bank on the V8 in particular ?

(Cus you know most Diseasels are missing 4 cylinders.. ) :lol:

Keep posting up like that Martin and I'll not be sure they'll let you out of the country ! (Or maybe not back in......)

Neil

Link to comment
Share on other sites

(Cus you know most Diseasels are missing 4 cylinders.. )

Or another way of putting it......diesels are more awesome with only half the cylinders?! wink.gifbiggrin.gif

Seriously though, these clips pop up all the time, with people showing off their engine sound, and even though I like them; I am never more than mildly impressed.

For the first time ever, after watching your clip, my first thought was "I want one of those bad mo fo's" wub.gif

Maybe when I get back from the trip and I have declared myself bankrupt getting one of these can be my project.

Martin

Link to comment
Share on other sites

The suggeston was a seed Pete.

A chat with Nige earlier and he suggested the forum members could work miracles...

Got chatting with Luke on MSN and he suggested a night of madness...

The rest is history!

See you in a few weeks!

Neil

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy