max Posted April 9, 2006 Share Posted April 9, 2006 Hi, I want to buy a mig welder and am looking for reccomendations, i haven't done any mig welding for a few years but used to be alright on thicker stuff (5mm), don't want to waste my money on an inferior product. Would appreciate any comments/experiences. ManyThanks Quote Link to comment Share on other sites More sharing options...
mpb Posted April 9, 2006 Share Posted April 9, 2006 Hi, I want to buy a mig welder and am looking for reccomendations, i haven't done any mig welding for a few years but used to be alright on thicker stuff (5mm), don't want to waste my money on an inferior product. Would appreciate any comments/experiences. ManyThanks Best advice is buy the biggest you can aford. Look for a MIG rated at 150+ amps. Have a search on this forum, lots of advice on here. http://forums.lr4x4.com/index.php?showtopic=448 Hope this helps Quote Link to comment Share on other sites More sharing options...
Troddenmasses Posted April 10, 2006 Share Posted April 10, 2006 Have always found SIP products to be good. The cheapest place that I have found selling them on the internet is: World of Power Quote Link to comment Share on other sites More sharing options...
dollythelw Posted April 10, 2006 Share Posted April 10, 2006 I might have a surplus Butters 200a single phase going spare soon, euro torch, full size reel capacity and about as loud as you can get on single phase Quote Link to comment Share on other sites More sharing options...
SiWhite Posted April 10, 2006 Share Posted April 10, 2006 Jez, I'd be super interested in your MIG when it becomes available..... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.