Effortless Posted November 17, 2009 Share Posted November 17, 2009 Hi folks, I have a Mayflower winch that I split for a rebuild a few years ago. I would now like to get it running again, but in the years it's been in bits and moved around, I've managed to lose a few bits. Most importantly, the clutch dog which slides on the mainshaft and engages with a dog on the drum. Any idea where I can get one? Has someone a winch in bits that I could take the clutch dog to an engineers to get another one made? I have called Superwinch in Tavistock, and drawn a blank there (Mayflower turned into Fairy turned into Superwinch). I also seem to have mislaid the two brake shoes and brake shoe springs... doh!! Any ideas?? Cheers, Effortless. Quote Link to comment Share on other sites More sharing options...
ltwt1981 Posted November 17, 2009 Share Posted November 17, 2009 I've got a complete winch, in working order, yours for £150.00. Yuo've got all you need then. Quote Link to comment Share on other sites More sharing options...
Effortless Posted November 17, 2009 Author Share Posted November 17, 2009 I've got a complete winch, in working order, yours for £150.00. Yuo've got all you need then. Ooh err... that sounds exciting!! Any photos?? Any idea of condition??Any idea what the worm and wheel are like? All the bits... PTO, shafts, UJ's, centre join, winch body, winch frame?? Cheers, Effortless Quote Link to comment Share on other sites More sharing options...
themetalbenders Posted December 1, 2011 Share Posted December 1, 2011 is that winch still for sale? im basically in the same position Quote Link to comment Share on other sites More sharing options...
Effortless Posted December 4, 2011 Author Share Posted December 4, 2011 Gone I'm afraid... 'cos I bought it! If you're not in a hurry though, keep an eye out on eBay, on the sales sections of this site and the Series 2 Club forum, and OLLR... bound to get one. Also, if it's certain parts you need, post up here and someone may have bit lying about. I've broken my old winch for parts, most still available... what is it you need?? HTH Effortless Cheers, Effortless Quote Link to comment Share on other sites More sharing options...
themetalbenders Posted December 5, 2011 Share Posted December 5, 2011 Im looking for the shaft that connects from the pto to the second shaft.. I also need the big pin that connects the shaft to the pto box...finally I need the lever mechanism and the part that fits on the cog of the pto box that controls it.. nasty list don't you think? If anybody has any of these bits id greatly appreciate it!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.