twizzle Posted December 24, 2009 Share Posted December 24, 2009 has anybody seen this bolt on a round heater before what dose it do Twizzle Quote Link to comment Share on other sites More sharing options...
steve b Posted December 24, 2009 Share Posted December 24, 2009 It takes the screen demister pipework, which just pushs in the top of the heater housing and onto the stubs of the metal vent boxs hth Steveb Quote Link to comment Share on other sites More sharing options...
Spongie2a Posted December 24, 2009 Share Posted December 24, 2009 It takes the screen demister pipework, which just pushs in the top of the heater housing and onto the stubs of the metal vent boxs hth Steveb No chap re read the post, not the demister housing, the bolt on the side of the matrix that is not holding anything in place Quote Link to comment Share on other sites More sharing options...
steve b Posted December 24, 2009 Share Posted December 24, 2009 oops my mistake .......its been a long year ..haven't seen that on any before.. cheers Steveb Quote Link to comment Share on other sites More sharing options...
kingdong2 Posted December 24, 2009 Share Posted December 24, 2009 just removed my round smiths heater and fitted a square heater but when i removed the round heater i didn't see a bolt there. graham ______________________ 1962 2a swb 200 tdi. 1997 disco 1 300 tdi. Quote Link to comment Share on other sites More sharing options...
twizzle Posted January 6, 2010 Author Share Posted January 6, 2010 found out from my brother my dad had it made with it from a friend Twizzle Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.