gazelle Posted March 4, 2010 Share Posted March 4, 2010 Question from one of the less than practical: Why does the workshop manual say to disconnect the battery before doing anything; for example changing gearbox oil. What possible effect could the battery have on changing oils and the like? Martin Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted March 4, 2010 Share Posted March 4, 2010 Stops someone else in the workshop starting it up & moving it. Quote Link to comment Share on other sites More sharing options...
western Posted March 4, 2010 Share Posted March 4, 2010 just standard safety practice to prevent anyone getting hurt/vehicle damaged. Quote Link to comment Share on other sites More sharing options...
gazelle Posted March 4, 2010 Author Share Posted March 4, 2010 So if you are working on it on your own: should you? Quote Link to comment Share on other sites More sharing options...
western Posted March 4, 2010 Share Posted March 4, 2010 So if you are working on it on your own: should you? entirely your choice, depends on what job your going to do, I normally don't bother unless I'm working on the electrics. Quote Link to comment Share on other sites More sharing options...
jmattley Posted March 4, 2010 Share Posted March 4, 2010 I forgot to do it once when changing my starter motor, realized I should have when I accidentally stuck a spanner between 2 terminals and nearly welded the spanner to the terminals! Do it for electrics or you will diiie!! Quote Link to comment Share on other sites More sharing options...
TheRecklessEngineer Posted March 4, 2010 Share Posted March 4, 2010 When I was working on my discovery I very rarely disconnected the battery due to the extra hassle. The alarm/immobiliser/radio went all funky without power. Even when working of electrics, I generally isolated the circuit elsewhere by removing fuses etc. However, it is good practice to do so. Quote Link to comment Share on other sites More sharing options...
Les Henson Posted March 5, 2010 Share Posted March 5, 2010 You may not be doing something that involves electrics, but you might accidentally short something with a spanner or srewdriver while working, so it's wise to disconnect the battery. It's only a case of undoing a single nut to disconnect the earth, so hardly a lot of extra work, and might save a nasty accident/fire. Les. Quote Link to comment Share on other sites More sharing options...
GBMUD Posted March 5, 2010 Share Posted March 5, 2010 Reminds me of the guy who was changing the exhaust on his Ford. His wedding ring caught between the live terminal on the starter and the exhaust and he lost his finger as a result. Chris Quote Link to comment Share on other sites More sharing options...
gazelle Posted March 5, 2010 Author Share Posted March 5, 2010 With a TD5 with alarm, immobiliser, LR radio etc is there anything I should know before I disconnect the battery? Quote Link to comment Share on other sites More sharing options...
pete3000 Posted March 5, 2010 Share Posted March 5, 2010 With a TD5 with alarm, immobiliser, LR radio etc is there anything I should know before I disconnect the battery? yes "open and make sure immob is disengaged" before disconnecting the negative from the battery. I always take the negative off first due to the fact if you come into contact with bodywork there won't be a mild panic as the spanner sticks. Quote Link to comment Share on other sites More sharing options...
petethepilot Posted March 5, 2010 Share Posted March 5, 2010 Of course it´s sensible, but I disconnect the battery only if I´m doing welding or some electric work to starter or alternator. I think one reason for workshop manual´s statement is a liability issue. If Land Rover has stated so and you neglegted it, they are free from liability if you wake up next morning dead or injured... Quote Link to comment Share on other sites More sharing options...
disco_al Posted March 5, 2010 Share Posted March 5, 2010 it's worth investing in one of those little gizmo's that plug into the lighter socket to retain the codes. IIRC they use a 9v battery as a memory saver function. Quote Link to comment Share on other sites More sharing options...
western Posted March 5, 2010 Share Posted March 5, 2010 Of course it´s sensible, but I disconnect the battery only if I´m doing welding or some electric work to starter or alternator. I think one reason for workshop manual´s statement is a liability issue. If Land Rover has stated so and you neglegted it, they are free from liability if you wake up next morning dead or injured... if you wake up next morning dead how do you know ??? Quote Link to comment Share on other sites More sharing options...
Turbocharger Posted March 6, 2010 Share Posted March 6, 2010 It's purely so you think better of it and feel a little bit dangerous, and so that high-and-mighty types can pour scorn on the cowboys at Kwik-Fit etc who don't drain all flammable liquids from the vehicle before inflating a tyre. Les makes a good point re dropping tools etc though. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.