****inthemud Posted March 25, 2010 Share Posted March 25, 2010 Does anybody have preferably a diagram showing the layout of the bolts adjoining the tranny to the gearbox with their correct sizes. I currently have a nicely re-furbed pair of units done by Hardy Engineering in Leatherhead Surrey, however the linkage top, bell housing, gearbox, tranny, and handbrake (soon to be replaced with an X-brake upon re-fit) are all separate and I need to get all these scattered bolts back in the right holes. Any USEFUL pointers would be lovely. (hopefully not the obvious "why didnt you just mark them properly you numpty") Cheers people. Quote Link to comment Share on other sites More sharing options...
LandyLee Posted March 25, 2010 Share Posted March 25, 2010 what year etc is everything ,, Quote Link to comment Share on other sites More sharing options...
****inthemud Posted March 25, 2010 Author Share Posted March 25, 2010 I actually cant believe I didnt included any of that (was the sheer excitement of it all). Its a Defender '89 LT77 unit mated to Disco Tranny of the same type (going into a 90) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.