landrover598 Posted April 18, 2010 Share Posted April 18, 2010 Could someone with a soft top frame fitted to 90/110 please do me a huge favour, and run a tape measure over the frame hoop and confirm the following measurements for me Vertically from the top of the tub capping to the very top of the hoop Vertically from the top of the tub capping to the top of the hoop, just before it becomes the corner radius Horizontal width from side to side just below the top corner radius Horizontal width from side to side at capping height. Very much appreciated Quote Link to comment Share on other sites More sharing options...
Turbocharger Posted April 18, 2010 Share Posted April 18, 2010 Dave, Here's mine (we know they're all different): Vertically, 730mm max height, 580mm to the horizontal rail(start of the bend) Horizontally, 1450 and 1480mm. What'cha making? Quote Link to comment Share on other sites More sharing options...
landrover598 Posted April 18, 2010 Author Share Posted April 18, 2010 Tar very much What'cha making? can you guess ? I'm making sticks for my soft top out of 2" tube. Quote Link to comment Share on other sites More sharing options...
Turbocharger Posted April 18, 2010 Share Posted April 18, 2010 I'd like to see a softtop which tapers in and down at the back, like a BMW X6-kinda shape. You rarely use the top rear corners and it'd be interesting to see if there's any fuel saving at speed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.