carlosbeldia Posted April 22, 2010 Share Posted April 22, 2010 I have just seen some videos about anti stall in TD4, and it really is a LOT better than my TD5 one. Is there any way to improve it? Quote Link to comment Share on other sites More sharing options...
carlosbeldia Posted April 22, 2010 Author Share Posted April 22, 2010 I've been googling and read in various post that NNN ECU have a very improved anti stall software over the MSB (mine is a MSB). Is this exact? Quote Link to comment Share on other sites More sharing options...
crwoody Posted April 22, 2010 Share Posted April 22, 2010 I've changed mine from a MSB to NNN because the original one went faulty, I can't really say I noticed any difference to the anti-stall performance Quote Link to comment Share on other sites More sharing options...
Gilslandy Posted April 23, 2010 Share Posted April 23, 2010 after the remap mine came so good!! gil Quote Link to comment Share on other sites More sharing options...
carlosbeldia Posted April 23, 2010 Author Share Posted April 23, 2010 I want to remap, but have to change my ECU (not flasheable) Quote Link to comment Share on other sites More sharing options...
Anderzander Posted April 23, 2010 Share Posted April 23, 2010 There are people who can re-map it for you. I think they solder in a socket for a flashable chip. Sometime ago Porny, the resident expert, made a post about the difficulties that can occur by fitting a later flashable ECU into the earlier set up - a search might reveal the post if you were interested. On another issue I want to re-map mine and would love for the anti-stall to improve not sure if it will, though a smoothed out curve might help with the transition from anti-stall to throttle? Quote Link to comment Share on other sites More sharing options...
carlosbeldia Posted April 24, 2010 Author Share Posted April 24, 2010 Problem with soldering is that I'm in Colombia, so..... I'll try the search, didn't know there were issues.... thanks Quote Link to comment Share on other sites More sharing options...
Anderzander Posted April 24, 2010 Share Posted April 24, 2010 Here is the thread I mentioned - the post about problems swapping ECU's is mentioned on the linked page. Quote Link to comment Share on other sites More sharing options...
carlosbeldia Posted April 24, 2010 Author Share Posted April 24, 2010 Thanks a lot Ander, I'll have this in mind when buying my spare ECU. I have planned to do a trip all around South America and want to take an addtional ECU "just in case", didn't know about this problems.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.