SiWhite Posted April 24, 2010 Share Posted April 24, 2010 Despite tonnes of head scratching and blank-staring-at-the-loom, I still can't locate the multiplug that clips to the brake master cylinder resivoir, and detects low fluid level. Could someone with a TD5 look at the loom and tell me where the wires disappear? I don't have a handy TD5 to compare it to..... Quote Link to comment Share on other sites More sharing options...
western Posted April 24, 2010 Share Posted April 24, 2010 Shown on diagram below from RAVE manual are 2 x natural colour plastic [white]spade connectors.wires should be 1 x Black & 1 x Black/white trace. Quote Link to comment Share on other sites More sharing options...
Retroanaconda Posted April 24, 2010 Share Posted April 24, 2010 That's the same as my 200Tdi has, didn't think they had changed. Quote Link to comment Share on other sites More sharing options...
stravaigin Posted April 25, 2010 Share Posted April 25, 2010 This may or may not help Si, unfortunately I am no where near my Defender at the mo Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.