muddy4x4xfar Posted May 8, 2010 Share Posted May 8, 2010 hi . i need to get a 1.1 bar waste gate , for my td5 defender . where can i get one from . cheers Quote Link to comment Share on other sites More sharing options...
western Posted May 8, 2010 Share Posted May 8, 2010 AFAIK adjust the operating rod on your existing wastegate to get the desired boost pressure Quote Link to comment Share on other sites More sharing options...
muddy4x4xfar Posted May 8, 2010 Author Share Posted May 8, 2010 AFAIK adjust the operating rod on your existing wastegate to get the desired boost pressure cheers bud ill give it a try. i was just more concerned that it wont be able to handle 210 bhp when built up. but ill give it a try what should i do tighten it? Quote Link to comment Share on other sites More sharing options...
western Posted May 8, 2010 Share Posted May 8, 2010 IIRC the operating rod has to be shortened to increase,so yes tightened so the stroke is slightly less than now. Quote Link to comment Share on other sites More sharing options...
Porny Posted May 10, 2010 Share Posted May 10, 2010 cheers bud ill give it a try. i was just more concerned that it wont be able to handle 210 bhp when built up. but ill give it a try what should i do tighten it? You won't be getting 210bhp with a standard turbo..... and any uprated turbo would come with an uprated/matched actuator (in theory - but depends where it's from) Ian Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.