Ben B Posted May 10, 2010 Share Posted May 10, 2010 Hoping someone might have a magic wand...... I am pulling my hair out trying to find either a pair of Rear Inner Wheel Arches complete or repair panels for my 4 door 1991 RRC. I thought I had struck gold at MM 4x4 as they had a pair advertised, however after ordering they called to say no longer available!!! Any thoughts as to where I might get a pair or does any one have some ideas on fabricating a repair panel? Mine have rusted through at the usual place where the rear seat belt mounts are. Rimmer bros have ones for the 2 door RRC, does any one have any experience of making the 2 door ones fit a 4 door shell? Many thanks in advance for your thoughts/help. Quote Link to comment Share on other sites More sharing options...
sheltie50 Posted May 10, 2010 Share Posted May 10, 2010 Try this link http://www.landroverspares.co.uk/category.html?id=93, got to be worth a call. Cant be such a bad job to use the 2 door panel. Quote Link to comment Share on other sites More sharing options...
chopes Posted May 11, 2010 Share Posted May 11, 2010 Try this link http://www.yrm-metal-solutions.co.uk/ They stock a lot of body parts for the Classic Range Rover and seem to fabricate others to order. Quote Link to comment Share on other sites More sharing options...
Highway_Star Posted May 11, 2010 Share Posted May 11, 2010 Using the 2 door inner wheel arch panel on a 4 door shell is not at all difficult. Me and a mate did my old 82 that way some years ago. In fact I don't remember there being a choice of 2 or 4 door inner wheel arch panels when I bought the bits. My current 1990 had gone at the seat belt mounts, I chopped out the rust, fabricated repair sections and welded them in. I seem to remember Les Henson doing one of his write ups on that common job. Have a look in the tech archive section. Quote Link to comment Share on other sites More sharing options...
Ben B Posted May 14, 2010 Author Share Posted May 14, 2010 Brilliant. thank you everyone for your words of wisdom! Quote Link to comment Share on other sites More sharing options...
DrRob Posted February 14, 2012 Share Posted February 14, 2012 BenB - how did you get on with rear inner wheel repair panels? Cheers Rob Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.