Michele Posted May 16, 2006 Share Posted May 16, 2006 Courtesy of Staun US .pdf installation sheet *742.54 KB* Shame for the price Quote Link to comment Share on other sites More sharing options...
Roman Posted May 16, 2006 Share Posted May 16, 2006 Shame for the price Hi Michele, Look at it this way: the price is there to prevent you from wasting your money on useless gimmicks. Mind you, the price also incudes a set of rims which, once drilled for the second vale, can't be reused for ordinary inner tubes. Quote Link to comment Share on other sites More sharing options...
Michele Posted May 16, 2006 Author Share Posted May 16, 2006 Mind you, the price also incudes a set of rims Who? Where? When? I was offered the beadlocks only,no mention of a set of rims...? Quote Link to comment Share on other sites More sharing options...
isuzurover Posted May 16, 2006 Share Posted May 16, 2006 I have never heard of the stauns being sold with rims? You drill the rims yourself. But it is pretty easy to weld up the holes if you decide to get rid of the stauns and keep the rims. Quote Link to comment Share on other sites More sharing options...
Michele Posted May 16, 2006 Author Share Posted May 16, 2006 Alternative inner beadlocks Inner Airlock Quote Link to comment Share on other sites More sharing options...
isuzurover Posted May 16, 2006 Share Posted May 16, 2006 These are a MUCH better idea. http://www.pirate4x4.com/forum/showthread.php?t=167971 I am finally ready, I have spent allot of time lately sourcing out all the materials I will need and now am ready to start taking orders.I am offering 15, 16, 16.5, 17, and 20" wheels in double beadlock form. These wheels are new to me and I have not done them in the smaller sizes yet but with the experiences I have had with the 20's that I have done I am confident that I can make a quality wheel that can satisfy your needs. A little about this design of wheel and what I am doing different. I am using HDPE pipe instead of PVC thanks to "jasonmt" It is more flexible and with some work I am hoping that I can make it fit into a tire without having to cut it into two pieces. I am going to use two full plates for the wheel center, this allows me more options when drawing center designs as well as giving me the ability to do some 3D affects without compromising strength. I am going to use an o-ring to seal the wheels instead of silicone. I will offer the rims in most any width with any back spacing. This is generally speaking, odd requests may have some additional costs. I also feel I can offer better looking welds compared to other wheels like this that will not leak the rims will be priced at, 15" -200$ 16" -200$ 16.5" -200$ 17" -225$ 20" -250$ These prices may be adjusted for future orders after I get into production and find out how things go. Basically the wheel is 2-piece (bolts together like the very first series rims) with a hard plastic beadlock in the middle. So not too heavy, and NO BEADLOCK INFLATING. Quote Link to comment Share on other sites More sharing options...
will_warne Posted May 16, 2006 Share Posted May 16, 2006 These are a MUCH better idea.http://www.pirate4x4.com/forum/showthread.php?t=167971 Basically the wheel is 2-piece (bolts together like the very first series rims) with a hard plastic beadlock in the middle. So not too heavy, and NO BEADLOCK INFLATING. This is the sort of thing I'm going for; the best option IMHO. Quote Link to comment Share on other sites More sharing options...
Michele Posted May 16, 2006 Author Share Posted May 16, 2006 Another .pdf for the collection,from the Staz site: 2.86 MB Quote Link to comment Share on other sites More sharing options...
Michele Posted May 16, 2006 Author Share Posted May 16, 2006 This is the sort of thing I'm going for Forum mass buy? Quote Link to comment Share on other sites More sharing options...
will_warne Posted May 16, 2006 Share Posted May 16, 2006 Forum mass buy? I'll probably be getting mine a little closer to home, however, if I go down that route there are already a few others interested so adding some more would be fine. Quote Link to comment Share on other sites More sharing options...
Michele Posted May 16, 2006 Author Share Posted May 16, 2006 Just out of curiosity... ...£=? Quote Link to comment Share on other sites More sharing options...
Roman Posted May 16, 2006 Share Posted May 16, 2006 I was offered the beadlocks only,no mention of a set of rims...? Michele, No, no rims are included in the price at the time of purchase! I am talking about new rims you'll have to buy YOURSELF after you discover it wasn't quite what you were expecting for the money. I have six stauns probably still lying somewhere in the garden shed, of which three look like damaged beyond repair. If you are still interested, you can have the undamaged ones or the whole lot for a few quid plus postage. Quote Link to comment Share on other sites More sharing options...
Michele Posted May 16, 2006 Author Share Posted May 16, 2006 Ah...! Sorry to hear you scrapped 4 rims...?!? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.