Maverik Posted June 2, 2010 Share Posted June 2, 2010 Looking at putting a TD5 bulkhead into my 84 reg 90. I notice there is no center hole in the the TD5 bulkhead for the mian wireing loom to cme through to the fuse box, anyone know where the main loom penetration is, is it in the passanger side footwell? Cheers Mav Quote Link to comment Share on other sites More sharing options...
K88 MUD Posted June 2, 2010 Share Posted June 2, 2010 The wiring harness goes through the bulkhead in 2 places.....just above the heater box on the N/S and above the pedal box's on the O/S. HTH Quote Link to comment Share on other sites More sharing options...
SiWhite Posted June 2, 2010 Share Posted June 2, 2010 Two holes IIRC, one behind the instruments and a similar aperture on the other side of the bulkhead. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.