LR NUT Posted June 4, 2010 Share Posted June 4, 2010 Hi guys Where abouts is the clutch switch on a disco 2 TD5? (2004/2005) Are the wires to this connected underneath the clutch master cylinder? Cheers guys Quote Link to comment Share on other sites More sharing options...
Les Henson Posted June 4, 2010 Share Posted June 4, 2010 According to EPC - the clutch switch is inline - on a T-piece in the pipe. Les. Quote Link to comment Share on other sites More sharing options...
ches Posted June 4, 2010 Share Posted June 4, 2010 off side inner wing near bulkhead. Quote Link to comment Share on other sites More sharing options...
M&S Posted June 4, 2010 Share Posted June 4, 2010 Is it not screwed into the bottom of the master cylinder? There's something screwed in there with wires connected to it as I had to transfer it over to my new master cylinder just the other week. I presumed that this was the clutch switch... Quote Link to comment Share on other sites More sharing options...
ches Posted June 5, 2010 Share Posted June 5, 2010 No. 11 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.