Maverik Posted July 5, 2010 Share Posted July 5, 2010 Have a 86 LR90 with Disco 200Tdi. I recently found the oil pressure switch wire dangling quite forlornly from its switch housing, can anyone give me any pointers as to a location on the main engine wireing loom where is splits off from? Its the original 86 loom too, so nice and basic - i just can't find the other end!!! Cheers mav Quote Link to comment Share on other sites More sharing options...
errol209 Posted July 5, 2010 Share Posted July 5, 2010 Have a 86 LR90 with Disco 200Tdi. I recently found the oil pressure switch wire dangling quite forlornly from its switch housing, can anyone give me any pointers as to a location on the main engine wireing loom where is splits off from? Its the original 86 loom too, so nice and basic - i just can't find the other end!!! Cheers mav Its part of the engine loom - connects to a grey multiplug above the clutch master cylinder. Wire is white / brown and should emerge just aft of the injector pump near glow plug level. Quote Link to comment Share on other sites More sharing options...
Maverik Posted July 5, 2010 Author Share Posted July 5, 2010 Its part of the engine loom - connects to a grey multiplug above the clutch master cylinder. Wire is white / brown and should emerge just aft of the injector pump near glow plug level. Cheers, I'll go a hunting. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.