ajh Posted July 8, 2010 Share Posted July 8, 2010 While on my pre-1994 they still required cutting to fit, the plinths made things look much better overall. I'm wondering if Boltonbits is the sole-supplier for these (1. they don't have stock 2. there were issues having them send them outside the UK/Respond to Email at all). Quote Link to comment Share on other sites More sharing options...
WarPig Posted July 8, 2010 Share Posted July 8, 2010 I dont know what 'easy fit plinths' are, could you explain? Quote Link to comment Share on other sites More sharing options...
cackshifter Posted July 8, 2010 Share Posted July 8, 2010 I think AJH means NAS light plinths - the easy fit ones have a joggle in the sides, the standard sides are straight. That means you don't have to enlarge the holes in the panels to fit NAS lights. AFAIK, Boltonbits is the only source of them. Nigel Quote Link to comment Share on other sites More sharing options...
western Posted July 8, 2010 Share Posted July 8, 2010 I dont know what 'easy fit plinths' are, could you explain? for the NAS type front lights http://www.boltonbits.net/easyfit-plinth-p-117.html?osCsid=7a06cdf1164a903fec2a8efab8c34258 they look like this without the light fitted, made so there shouldn't be a need to adjust the headlight surround trim Quote Link to comment Share on other sites More sharing options...
ajh Posted July 8, 2010 Author Share Posted July 8, 2010 On 1994 or newer no, on earlier the holes don't line up, the cutting is minor, though I wish I'd done the rear cappings prior to re-galvanizing them but I didn't have the plinths at the time. If Boltonbits is the only supplier I guess I'll have to wait. Quote Link to comment Share on other sites More sharing options...
Steve Warman Posted July 9, 2010 Share Posted July 9, 2010 They are on ebay as well, here as rdx-international-only Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.