royaub Posted September 12, 2010 Share Posted September 12, 2010 Hi all I've recently had to have the rear crossmember replaced and now I want to put my original adjustable towbar back on (the bolts were completely rotted) so I am now missing the two large top bolts that go through the towbar and the crossmember.Can anyone tell me what size they are? Also can anybody tell me what the plate at the back with the two welded nuts on is and where to get it from? Any help is much appreciated Thanks Roy Quote Link to comment Share on other sites More sharing options...
western Posted September 12, 2010 Share Posted September 12, 2010 No picture but this plate would do the job 562756 no welded on nuts nut that can be done fairly easily you can get suitable HT bolts [nothing less than 8.8 or better 10.9 rating from most good engineering suppliers Quote Link to comment Share on other sites More sharing options...
royaub Posted September 12, 2010 Author Share Posted September 12, 2010 Hi western Do you now how long they are ? Thanks Roy Quote Link to comment Share on other sites More sharing options...
western Posted September 13, 2010 Share Posted September 13, 2010 not without getting under my rear crossmember & measuring them. Quote Link to comment Share on other sites More sharing options...
royaub Posted September 13, 2010 Author Share Posted September 13, 2010 Ok thanks i will have a look Roy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.