4x4ledbury Posted October 3, 2010 Share Posted October 3, 2010 im replacing the clutch fork in my g reg 90 so naturally its a gearbox out job. it would appear that the transfer box stick will be in the way how easy is it to remove looks like a 4x 13mm bolts but ive read i have to mark the linkages. what does this mean any one replaced a clutch on a lt77 before can offer up any advice thankyou Quote Link to comment Share on other sites More sharing options...
western Posted October 3, 2010 Share Posted October 3, 2010 disconnect linkage, make a note or photo of where the pins/nylon bushes fit, replace clutch & release bearing while you have the gearbox/engine split, it's just the 4 bols but they are different lengths so note where each one fits. this thread will help you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.