TobyMellin Posted February 23, 2011 Share Posted February 23, 2011 Whilst fitting a new fan belt yesterday, I notice the bolt that holds the bracket on for the panhard rod etc was missing. Does anyone know the exact size of the bolt? Apparently it's an imeperial thread? Any help is appreciated! Toby Quote Link to comment Share on other sites More sharing options...
landroversforever Posted February 23, 2011 Share Posted February 23, 2011 BOLT 1/2 UNF X 6.1/2 there you go Toby Quote Link to comment Share on other sites More sharing options...
western Posted February 23, 2011 Share Posted February 23, 2011 item 20 on page 435 http://www.retroanaconda.com/landrover/parts_books/110/5_axles_suspension_steering_p398-471.pdf Quote Link to comment Share on other sites More sharing options...
TobyMellin Posted February 23, 2011 Author Share Posted February 23, 2011 Smashing! Cheers guys! Quote Link to comment Share on other sites More sharing options...
nickwilliams Posted February 23, 2011 Share Posted February 23, 2011 Smashing! Cheers guys! The bolt needs to be at least grade 8.8. I may well have the ones that came out of mine originally if you'd like one of them. Nick. Quote Link to comment Share on other sites More sharing options...
voevod Posted February 23, 2011 Share Posted February 23, 2011 you must be getting some amount of judder through your steering without that bolt Quote Link to comment Share on other sites More sharing options...
TobyMellin Posted February 24, 2011 Author Share Posted February 24, 2011 The bolt needs to be at least grade 8.8. I may well have the ones that came out of mine originally if you'd like one of them. Nick. Cheers Nick, if I can't get hold of one today I'll let you know you must be getting some amount of judder through your steering without that bolt Surprisingly no judder...but the car does have a mind of its own sometime, but I put that down to the tires Quote Link to comment Share on other sites More sharing options...
rusty_wingnut Posted February 24, 2011 Share Posted February 24, 2011 The bolt in mine had worn and "shouldered" maybe it was lose, but seemed very tight when trying to remove it. It's now been replaced with a new one. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.