Geoffroy Posted March 16, 2011 Share Posted March 16, 2011 I'm looking for SerieIIA chassis drawings. I have the drawings in the blue Haynes manual but I'm looking for more complete drawings. I'm mainly looking for outrigger and rear cross member dimensions. Where I can get these drawings or dimensions? Thank you Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted March 16, 2011 Share Posted March 16, 2011 Are these any good? (From S3 green bible) Quote Link to comment Share on other sites More sharing options...
Geoffroy Posted March 17, 2011 Author Share Posted March 17, 2011 Thank you very much. The second picture is very interesting Quote Link to comment Share on other sites More sharing options...
Geoffroy Posted March 17, 2011 Author Share Posted March 17, 2011 What is the source of your second picture? Is it also the land rover green book? Quote Link to comment Share on other sites More sharing options...
Cliffordtdi Posted May 22, 2020 Share Posted May 22, 2020 Does anyone know the difference in height of the spring mounting holes on a 1 ton as opposed to a standard chassis? I'm asking in advance of my build, to enable me to draw up laser cuts ready. I want to do twin mounting holes like what Richards offer , but my chassis requires quite a few other mods 🙂 Quote Link to comment Share on other sites More sharing options...
Snagger Posted May 22, 2020 Share Posted May 22, 2020 I think it was 40mm, but I don’t have access to mine, so can’t be sure. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.