minivin Posted July 11, 2006 Share Posted July 11, 2006 Hopefully someone will know this, I lathed down the short nose on my LT77 so that it would fit into a V8 crankshaft standard bush (think 3/4"), does anyone know the diameter of the nose of the input shaft for a series box or LT77 that would mate upto a 2.5NAD / 2.5TD / 200TDi? need to machine up a mild steel bush to go onto my LT77 for the moment so that it will fit into the 2.5NAD till I fit my V8 in a months time Quote Link to comment Share on other sites More sharing options...
Tonk Posted July 11, 2006 Share Posted July 11, 2006 i've got a lt77 in the workshop, i'll try and go measure in a minute, if its any help its bigger than a v8 Quote Link to comment Share on other sites More sharing options...
Tonk Posted July 11, 2006 Share Posted July 11, 2006 lt77 measures 22.2mm so probably 7/8" in old money Quote Link to comment Share on other sites More sharing options...
minivin Posted July 11, 2006 Author Share Posted July 11, 2006 shweet, sounds about right from memory on how much I had to skim off, will try and commision the lathe tonight and get the bush made and loctite'd on think I got a 7/8 reamer just incase it's a little tight on the 2.5NAD crank Quote Link to comment Share on other sites More sharing options...
Andy Posted July 11, 2006 Share Posted July 11, 2006 well ive got a LT77 from a 200TDi in the kitchen (can you tell im single yet?) and i agree its 7/8" Quote Link to comment Share on other sites More sharing options...
minivin Posted July 11, 2006 Author Share Posted July 11, 2006 shweet, cheers very much! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.