muddy4x4xfar Posted April 27, 2011 Share Posted April 27, 2011 hi all. does anyone have a 1992 range rover classic borg warner workshop manual i could maybe please download or does anyone know where i can get one/?? or is there a forum on how to change the viscous inside that anyone knows about? im sure its a simple job and self explanitary.but iv never done before so i wanted to check cheers all chris Quote Link to comment Share on other sites More sharing options...
DC_ Posted April 28, 2011 Share Posted April 28, 2011 Hope this helps, not sure if it gives you it in great detail http://www.landroverresource.com/docs/rangerover/Range_Rover_Manual_1992.pdf Quote Link to comment Share on other sites More sharing options...
Range Rover Blues Posted May 3, 2011 Share Posted May 3, 2011 You take the front cover off the box and the viscous unit comes out with it, the front flange still attached. You can do it without taking the whole box out of the car. Quote Link to comment Share on other sites More sharing options...
MikeAK Posted May 3, 2011 Share Posted May 3, 2011 Hi, Did mine (1993) about 3 months ago. Nothing difficult to it. Just removed the front prop then unbolt viscous housing from front of transfer box. I think I had to unbolt the exhaust from the manifolds to allow it to drop to get the viscous housing out, it was easily done in an afternoon. There is no gasket on the viscous housing, its sealed with silcone gasket so make sure you have some to hand. Mike Quote Link to comment Share on other sites More sharing options...
muddy4x4xfar Posted May 3, 2011 Author Share Posted May 3, 2011 hi all cheers for replies. much apprieciated Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.