Tomcat Nev Posted July 24, 2006 Share Posted July 24, 2006 After hitting a tree! And then just prove it was not terminal: But i have bent the axle and the damper as well. Ho hum. Got a finish with no maximums........ Nev Quote Link to comment Share on other sites More sharing options...
Steve Hiatt Posted July 24, 2006 Share Posted July 24, 2006 I take it that was going downhill as you don't have the grunt to do that under your own steam? Glad you go a result Quote Link to comment Share on other sites More sharing options...
will_warne Posted July 24, 2006 Share Posted July 24, 2006 You've done that properly; Well Done! Quote Link to comment Share on other sites More sharing options...
mwncidur Posted July 24, 2006 Share Posted July 24, 2006 good job they were not qt drilled things. it would have been twice as bad. Quote Link to comment Share on other sites More sharing options...
Tomcat Nev Posted July 24, 2006 Author Share Posted July 24, 2006 As it happens it was up hill -and i was very fast too (for me). Nothing wrong with a 3.9 at 5800 rpm in 2nd. I was thinking about drilled or drilling the radius arms. I am not now. But it does prove the engineering behind my extension bars and the chassis mounting. Just got to remember what i made the extension pieces out of! I shall hang it on the wall of the workshop. Nev Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.